Hey all,
We successfully swapped the 135i DCT trans into my 335. When we first started the car,(pre coding) it started right up and idled fine. When we proceeded to code the GS40 with 8606092(after changing the cas and nfrms VO), it produced errors codes stating that the ecu isnt connected. We followed the wiring diagrams for the shifter and it works as it should. We are not sure where to go from here as we re checked our wiring multiple times. The only thing we could think of was that the pt can lines were swapped. Switching them didnt work.
We dont know where to go from here, so any help would be appreciated!
2/19/2009 335i n54 MSD81
We successfully swapped the 135i DCT trans into my 335. When we first started the car,(pre coding) it started right up and idled fine. When we proceeded to code the GS40 with 8606092(after changing the cas and nfrms VO), it produced errors codes stating that the ecu isnt connected. We followed the wiring diagrams for the shifter and it works as it should. We are not sure where to go from here as we re checked our wiring multiple times. The only thing we could think of was that the pt can lines were swapped. Switching them didnt work.
We dont know where to go from here, so any help would be appreciated!
2/19/2009 335i n54 MSD81
Last edited: